Marvel Industrial Coatings Blog

We are the premier provider of Polyurea Spray-On Liner Systems, Industrial Protective Coatings, Spray Foam Solutions, and Industry-leading Technical Support. Providing top notch training and first-class technical support, our team has you covered from Start to Finish.

Connect with an Expert

What is Marvel's EZ Spray-On Cartridge System?

← Back to List
Let's say you have a small body shop. One of your services is spray-on bedliners. You don't do a lot of vehicles, but you do enough business that you need to own equipment. A mobile rig system is just too much. Is there something smaller just for you?

There is and it's Marvel Industrial Coatings' EZ spray-on cartridge system. This system is designed especially for businesses who only spray 10 or fewer vehicles a month or for those who handle applications while on the go. It's easy to learn and you'll be spraying in no time!

Each cartridge case comes complete will all the accessories you need to spray a polyurea coating. All the system needs is 11 cfm of dry/clean air to operate.

How Does it Work?


We have three static mixer types available for this system. Once you pick the right mixer for your needs, you attach the cartridge into the gun and you got a stream!

What happens is the air will push the material out of the cartridges. The tip of the gun is atomized, which gives it that nice, consistent spray.

It's simple:

  • First, you need to prepare the cartridges. You will want to shake each cartridge for at least 20 seconds before you begin to spray. To keep the chemicals from cross contaminating, you will want to keep the cartridge pointed up, especially when the cap is removed.

  • When the chemicals are mixed, remove the cap and attach the cartridge to the static mixer. Make sure it's screwed on tight and you don't cross thread the nut.

  • You will the connect the airline of the gun, making sure the plungers are retracted all the way back.

  • Then, holding the gun pointing up, place the cartridge all the way flat into the carriage of the gun and attach the air hose to the atomizer.


Before you spray the truck, you're going to want to make sure the gun is working properly. Point the front of a gun downward, pull the trigger to start the flow of the chemicals into a stream. Let the chemicals flow through the static mixer. Once the stream is even and solid black, open the air atomizer control valve 1/4 of the way open and then you can start spraying!

And once you're done with it, all you have to do is throw it away. It's that simple!

Is the EZ Spray-On Cartridge System Best for Your Business?


As we said before, our EZ spray-on cartridge system is best for those businesses who spray on the go or don't do much coating. It works great on concrete and wood services and is ideal for garages and service bodies. The application of this system is ideal for any type of vehicle such as:

  • Truck bedliners

  • Construction vehicles

  • Vans

  • RVs

  • ATVs

  • Jeeps

  • Emergency vehicles


If you're interested in learning more about our EZ spray-on cartridge system or want to pick one up, then all you have to do is give us a call. Contact Marvel Industrial Coatings today for more information on our equipment.