Chemicals:
Primers

A coating system consists of multiple elements: surface preparation, primers to increase the chemical & mechanical bond, and the right polyurea product. Each element is equally important but choosing the right primer will make a world of difference for long-term adhesion. Marvel has conducted thorough testing to ensure the quality of the primers we offer, and we stand behind these primers. 

A coating system consists of multiple elements: surface preparation, primers to increase the chemical & mechanical bond, and the right polyurea product. Each element is equally important but choosing the right primer will make a world of difference for long-term adhesion. Marvel has conducted thorough testing to ensure the quality of the primers we offer, and we stand behind these primers. 

This is our industrial grade MULTI-SURFACE PRIMER. This is truly a primer for ALL SURFACES. We tested this product, and can assure you with proper mixture, application, and dry time your system will be a success.

This can be applied to:

• Concrete
• Steel
• Wood
• Aluminum  
• Fiberglass

We ALWAYS recommend surface preparation, such as scuffing, sanding, etc. to create a mechanical bond. However, there are situations where trying to increase efficiency is an absolute must.  In those situations, you’ll need an adhesion promoter that will help your polyurea system bond with the unprepped surface. Our Marvel Adhesion Promoter is that product.

This product was developed for our customers seeking a product that will allow you to coat on top of an existing polyurea coating system. Our Recoat Primer product can also extend your “re-coat window”, so you can pick up where you left off even if you’re outside of the polyurea systems recoat window. Just wipe, let it dry, and re-apply your polyurea.

Unfortunately we come across jobsites where another system was improperly applied to a surface, and though you’d much rather remove it and start with a fresh application on the substrate, there’s a cost-savings opportunity that your customers sometimes demand. We all know that ANY coatings system is only as good as the bond with the substrate. If the customer insists on saving money on the “demo”, then this recoat primer will help you provide an affordable coating system option.